Supermicro SuperServer 2028BT-HTR+, Руководство пользователя

Страница: 52 / 128

SuperServer
2028BT-Hxxx User Manual
5-8
5-5 Installing the Expansion Cards
The system can accommodate two low-profile cards per node, for a total of eight
in the chassis.
Installing an Expansion Card
1. Power down the node and remove it from the chassis.
2. Remove the screws holding the riser card brackets.
•
For the right side (looking from the node rear), remove the three screws
on the right.
•
For the left side, remove the three screws on the left.
3. Remove the blank PCI shield from the bracket.
4. Slide the expansion card bracket into the open PCI slot while plugging the
expansion card into the riser card.
5. Secure the expansion card bracket into the PCI slot with a screw.
6. Replace the riser card brackets and secure with the screws.
Figure 5-10. Installing the Expansion Card
Riser Card
Bracket screw
Riser Card
Bracket screw
Riser Card
Bracket screw
Riser Card
Bracket screw
Riser Card
Bracket screw