Supermicro SuperServer 2028BT-HTR+, Руководство пользователя

Страница: 17 / 128

2-5
Installing the Rails on a Rack
1. Loosen the adjusting screw to allow the rear section to slide in the front section.
2. Push the small hooks on the front section of the rail into the holes on the front
post of the rack and then down, until the spring-loaded pegs snap into the rack
holes. Secure the rail to the rack with screws.
3. Pull out the rear section of the outer rail, adjusting the length until it fits within
the posts of the rack and align the small hooks with the appropriate holes on
the rear post of the rack. Be sure the rail is level.
4. Mount the rear section onto the rack. Secure the rail with screws.
Figure 2-2. Attaching the Rail Front to the Rack
(Left rail shown)
Note
: Figures are for illustrative purposes only. Always install servers into racks
from the bottom up.