Supermicro SuperServer 2028BT-HTR+, Руководство пользователя

Страница: 77 / 128

Chapter 6: BIOS
6-19

sSATA Configuration
When this submenu is selected, AMI BIOS automatically detects the presence
of the SATA devices that are supported by the PCH controller and displays the
following items:
sSATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH-sSATA controller. The options are
Enabled and Disabled.
Configure sSATA as
Select IDE to configure an sSATA drive specified by the user as an IDE drive.
Select AHCI to configure an sSATA drive specified by the user as an AHCI drive.
Select RAID to configure an sSATA drive specified by the user as a RAID drive.
The options are IDE, AHCI , and RAID.
*If the item above "Configure sSATA as" is set to AHCI , the following items will
display:
sSATA Support Aggressive Link Power Management
When this item is set to Enabled, the sSATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are
Disabled and Enabled.
sSATA Port 0~ Port 3
This item displays the information detected on the installed on the sSATA port.
specified by the user.
•
Model number of drive and capacity
•
Software Preserve Support
sSATA Port 0~ Port 3
Select Enabled to enable an sSATA port specified by the user. The options are
Disabled and Enabled .
sSATA Port 0 ~ Port 3 Hot Plug
Select Enabled to enable hot-plugging support for a port specified by the user,
which will allow the user to replace a sSATA disk drive installed on this port
without shutting down the system. The options are
Enabled
and Disabled.
sSATA Port 0 ~ Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a
COMRESET initialization to the device. The options are Enabled and
Disabled .