SuperServer 1029P-NR32R User's Manual
78
Link L0p Enable
Select Enable to enable Link L0p. The options are Disable, Enable, and
Auto
.
Link L1 Enable
Select Enable to enable Link L1 (Level 1 link). The options are Disable, Enable, and
Auto
.
IO Directory Cache
Select Enable for the IODC (I/O Directory Cache) to generate snoops instead of generating
memory lockups for remote IIO (InvIToM) and/or WCiLF (Cores). Select Auto for the IODC to
generate snoops (instead of memory lockups) for WCiLF (Cores). The options are Disable,
Auto
, Enable for Remote InvItoM Hybrid Push, InvItoM AllocFlow, Enable for Remote
InvItoM Hybrid AllocNonAlloc, and Enable for Remote InvItoM and Remote WViLF.
Isoc Mode
Select Enabled for Isochronous support to meet QoS (Quality of Service) requirements.
This feature is especially important for Virtualization Technology. The options are Enable
and
Disable
.
SNC
Sub NUMA Clustering (SNC) is a feature that breaks up the Last Level Cache (LLC) into
clusters based on address range. Each cluster is connected to a subset of the memory
controller. Enabling SNC improves average latency and reduces memory access congestion
to achieve higher performance. Select Auto for 1-cluster or 2-clusters depending on IMC
interleave. Select Enable for Full SNC (2-clusters and 1-way IMC interleave). The options
are
Disable
, Enable, and Auto.
Stale AtoS
This feature optimizes A to S directory. When all snoop responses found in directory A
are found to be RspI, then all data is moved to directory S and is returned in S-state. The
options are
Disable
, Enable, and Auto.
LLC dead line alloc
Select Enable to optimally fill dead lines in LLC. Select Disable to never fill dead lines in
LLC. The options are Disable,
Enable
, and Auto.
