SuperServer 1029P-NR32R User's Manual
43
Confirm the eject operation by clicking the “OK” button on the following pop-up window.
Once the GUI indicates that the NVMe SSD has been rejected successfully, the target is
removed from the OS.
To confirm that target SSD has been removed from OS, do the following:
•
Execute the #lsblk command and check that the /dev entry has been removed.
•
Execute the #dmesg command and check the related messages.
•
For U.2 SSD in SYS-1029P-N32R, its slot LED should become solid GREEN. For RSSD
in SYS-1029P-NR32R, its LEDs should become OFF
After confirming that target NVMe SSD has been removed from OS, it can then be safely
removed from its slot.
In case the above action needs to be reversed, the ejected NVMe SSD can be re-installed
back into OS by clicking its Insert button:
4. The replacement NVMe SSD can now be hot inserted. After the OS has discovered the
newly inserted NVMe SSD, it will be ready for configuration and access.
