Supermicro Supero SC513 Series, Руководство пользователя

Страница: 28 / 58

SC513 Chassis Manual
5-6
Figure 5-7: Motherboard Standoffs
Standoffs
Standoffs prevent short circuits by securing space between the motherboard and
the chassis surface. The SC513 chassis includes permanent standoffs in locations
used by most motherboards. These standoffs accept the rounded Phillips head
screws included in the SC513 accessories packaging.
Installing the Motherboard
Review the documentation that came with your motherboard. Become familiar 1.
with component placement, requirements, precautions, and cable connec-
tions.
Disconnect the chassis from any power source. 2.
Compare the mounting holes in the motherboard and the mounting holes in 3.
the chassis and add or remove standoffs as required.
Align the motherboard with the chassis standoffs and carefully, place the 4.
motherboard in the chassis. Make sure rear ports line up with the I/O shield.
Secure the motherboard to the chassis. Do not exceed eight pounds of torque 5.
when tightening down the motherboard.
Secure the CPU(s), heatsinks, and other components to the motherboard as 6.
described in the motherboard documentation.
Connect the cables between the motherboard, backplane, chassis, front 7.
panel, and power supply.
Flat head
M4 x 4 mm
[0.157]
RAIL
Round head
M4 x 4 mm
[0.157]
Flat head
M5 x 12 mm [0.472]
Washer for M5
DVD-ROM CD-ROM FLOPPY DRIVE
Flat head
6-32 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
M/B
Flat head
6-32 x 5 mm
[0.197]
HARD DRIVE
Thumb screw
6-32 x 5 mm [0.197]
M/B standoff
6-32 to 6-32
M/B STANDOFF
M/B (CPU) standoff
M5 to 6-32
Round head
2.6 x 5 mm
[0.197]
Standoffs