Supermicro SC816LTS-655BP, Руководство пользователя

Страница: 76 / 104

6-8
S
UPER
S
ERVER 5017R-iHDP User's Manual
6-6 Replacing the Power Supply
The 5017R-iHDP includes a single 655W power supply. This power supply is auto-
switching capable, which enables it to automatically sense and operate at a 100 to
240 input voltage. An amber light will be illuminated on the power supply when the
power is off. An illuminated green light indicates that the power supply is operating.
Power Supply Replacement
The system must be powered down to replace the power supply. Replacement units
can be ordered directly from Supermicro.
Changing the Power Supply
1. Power down the system and disconnect the AC power cord from the power
supply. Remove the chassis cover.
2. Remove the two screws that secure the power supply to the chassis, as il-
lustrated below.
3. Press the release tab on the back of the power supply and pull the power
supply out using the handle provided.
4. Push the replacement power supply module into the power bay until it clicks
into the locked position. Secure with the screws previosuly removed.
5. Replace the chassis cover, then plug the AC power cord back into the power
supply and restore power to the system.
Screws
Figure 6-8. Replacing the Power Supply