Supermicro SC816LTS-655BP, Руководство пользователя

Страница: 23 / 104

Chapter 2: Server Installation
2-7
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Figure 2-4. Attaching the Outer Rails to a Rack
2. Adjust both the short and long brackets to the proper distance so that the rail
fits snugly into the rack.
3. Secure the long bracket to the front side of the outer rail with two M5 screws
and the short bracket to the rear side of the outer rail with three M5 screws.
Use a washer with each screw.
4. Repeat steps 1-4 for the remaining outer rail.