Supermicro SC816LTS-655BP, Руководство пользователя

Страница: 58 / 104

5-12
SUPERSERVER 5017R-iHDP User's Manual
5-9 Connector Definitions
Power Headers (JPWR1,JPWR2,J3)
These headers are used to connect
the motherboard to the power supply
and are proprietary to the 1U chassis.
Please see the tables on the right for
pin definitions.
JPWR1 and JPWR2 must be attached
to the power supply at same time along
with J3.
The four pin power header at J3 pro-
vides auxilliary power (PS_ON#) for the
system.
JPWR1, JPWR2
Pin Definitions
Pin # Definition Pin # Definition
1 GND 5 +12V
2 GND 6 +12V
3 GND 7 +12V
4 GND 8 +12V
J3
Pin Definitions
Pin # Definition Pin # Definition
1 GND 3 P5V_STBY
2 GND 4 PS_ON#
SATA DOM Power (JSD1)
The SATA DOM Power on JSD1 is used
to supply power to SATA Disk-on-Module
(DOM) solid-state storage devices.
Serial_Link-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 DATA In
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
Serial Link Headers (6-SGPIO)
The 6-SGPIO1 and 6-SGPIO2 (Serial-
Link General Purpose Input/Output)
are located near the USB4 port on the
motherboard. These headers are con-
nected to the AOC SAS/SATA and are
used to communicate with the enclosure
management chip in the system. See the
table on the right for pin definitions.
Chassis Intrusion (JL1)
A Chassis Intrusion header is located
at JL1 on the motherboard. Attach the
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chassis Intrusion
Pin Definitions (JL1)
Pin# Definition
1 Intrusion Input
2 Ground