Supermicro SC816LTS-655BP, Руководство пользователя

Страница: 51 / 104

Chapter 5: Advanced Serverboard Setup
5-5
5-5 Processor and Heatsink Installation
Notes:
•
When changing the CPU, always power down the system first. Make sure that
you install the CPU into its socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certified multi-
directional heatsink only.
•
When receiving a motherboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro web site for updates on CPU support.
Installing an LGA1155 Processor
1. Press the load lever to release the load plate, which covers the CPU socket,
from its locked position.
2. Gently lift the load lever to open the load plate. Remove the plate cap.
3. Use your thumb and your index finger to hold the CPU at the top center edge
and the bottom center edge of the CPU.
Load Lever
Load Plate