Supermicro FatTwin F619H6-FT, Руководство пользователя

Страница: 56 / 140

56
FatTwin F619H6-FT User's Manual
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB 0/1) on the I/O front panel. Please refer to the table below
for pin-out definitions.
Front Panel USB 0/1 (3.0)
Pin Definitions
Pin# Definition Pin# Definition
A1 VBUS B1 Power
A2 D- B2 USB_N
A3 D+ B3 USB_P
A4 GND B4 GND
A5 Stda_SSRX- B5 USB3_RN
A6 St B6 USB3_RP
A7 GND B7 GND
A8 Stda_SSTX- B8 USB3_TN
A9 St B9 USB3_TP
IPMI LAN
The IPMI-dedicated LAN port is supported by the AST 2500 BMC (Baseboard Management
Controller) It is located next to the power switch on the front panel, and accepts an RJ45 type
cable. Please refer to the LED Indicator section below for LAN LED information.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch, located on the front panel, and the UID LED (UIDLED1), located
next to the UID switch on the motherboard, provide easy identification of a system that may be
in need of service. When you press the UID switch, the UID LED will be turned on. Press the
switch again to turn off the UID LED. Please note that the UID switch can also be triggered
via IPMI on the motherboard. For more information, please refer to the IPMI User's Guide
posted on our website at
http://www.supermicro.com .)
UID Switch
Pin Definitions
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Pin Definitions
Color Status
Blue: On Unit Identified
VGA Port
A VGA port is located next to the SIOM slot on the front panel. Use this connection for VGA
display.