10
FatTwin F619H6-FT User's Manual
1.4 System Features
The following table provides you with an overview of the main features of the F619H6-FT.
Please refer to Appendix C for additional specifications.
System Features
Motherboard
X11DPFF-SN
Chassis
F414IS4-R2K04BP
CPU
Dual 81xx/61xx/51xx/41xx/31xx which offer 2 UPI (UltraPath Interconnect) of up to 10.4GT/s
Note:
Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer to the
block diagram on page 16 to determine which slots or devices may be affected.
Socket Type
Socket P0
Memory
Integrated memory controller embedded in the processor supports up to 1.5 TB of 3DS Load Reduced DIMM
(3DS LRDIMM), Load Reduced DIMM (LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM
(RDIMM), and NVDIMM DDR4 (288-pin) ECC memory of 2666/2400/2133 MHz in 12 slots per node
Chipset
C621 chipset
Expansion Slots
The X11DPFF-SN motherboard has the following expansion slots available.
One PCI-E 3.0 x16 slot supported by CPU 1 (JPCIE4)
One PCI-E 3.0 x8 slot supported by CPU 1 (Slot2)
One PCI-E 3.0 x16 Super I/O Module slot supported by CPU 1 (SIOM)
Four NVMe for PCI-E high-speed storage devices supported by CPU2 (PN-NVMe 0/1/2/3)
One Riser card header for SDD1 devices
Note:
only two slots are available in the front for use.
Hard Drives
The system has the capacity for 12 tool-less 3.5" SATA3 HDDs hard drives per node, or with an optional add on
card for 12 3.5" SAS2/SAS3 drives instead of SATA3 drives.
Power
Two (2) 2000 Watt power supplies
Cooling
Up to eight 8-cm tooless cooling fans mounted in the rear chassis
Form Factor
Proprietary: 18.73" (L) x 8.54" (W) (475.74 mm x 216.92 mm)
Dimensions
(WxHxD) 17.63 x 6.96 x 29 in. (448 x 177 x 737 mm)
