SC823M Chassis Manual
5-12
Expansion Card Setup
SC823M chassis include slots for expansion cards. The number of slots varies
depending upon the chassis model and the configuration of the system. See below
for information specific to each chassis model.
Expansion Card Setup in Low-Profile Model Chassis
In SC823M low-profile chassis models, up to seven expansion cards may be used.
Installing Expansion Cards in a Low Profile Chassis
1. Power down the system and remove the power cords from the rear of the
power supplies as described in Section 5-2. Remove the chassis cover as
described in Section 5-3.
2. Confirm that each expansion card you are installing includes a standard "L"
bracket.
3. Disconnect the power supply and lay the chassis on a flat surface.
4. Remove the screw holding the PCI slot cover in place on each card slot to be
used. Remove the PCI slot cover and keep the screw for later use.
5. Slide the expansion card's L-bracket into the PCI slot as illustrated below,
simultaneously connecting the expansion card to the mother board. Follow
any additional card manufacturer's instructions.
6. Secure each L-bracket using the screw that was previously removed.
7. Plug the power cords into the rear of the power supplies, replace the chassis
cover and power up the system.
Figure 5-12. Installing Expansion Cards - Low-Profile Chassis
1
5
Содержание CSE-823MTQ-R700LPB
