Supermicro 8028B-C0R4FT, Руководство пользователя

Страница: 63 / 144

Chapter 5: Advanced Serverboard Setup
5-13
Half-Populated Confi guration
Please follow the instructions below to populate half of the DIMM slots:
Processors and their
Corresponding Memory Modules
CPU# Corresponding DIMM
Modules for Full-Populated
Confi guration
CPU 1
(P1M1-)
P1M1-
DIMM A1/B1
P1M1-
DIMM C1/D1
CPU2
(P2M1-)
P2M1-
DIMM A1/B1
P2M1-
DIMM C1/D1
CPU3
(P3M1-)
P3M1-
DIMM A1/B1
P3M1-
DIMM C1/D1
CPU4
(P4M1-)
P4M1-
DIMM A1/B1
P4M1-
DIMM C1/D1
•
An Important Note:
For the memory modules to work properly, please install
DIMM modules of the same type, same speed, and same operating frequency
in the motherboard. Mixing of DIMM modules of different types or different
speeds is not allowed.
RDIMM/3DS LRDIMM DDR4 ECC in Performance Mode (2:1)
DDR4 RDIMM+LRDIMM (2:1)
Type Ranks Per DIMM &
Data Width (x8 is
supported, but not
listed)
SR=Single Rank
DR=Dual Rank
QR=Quad Rank
Max DIMM
Capacity (GB)
Max Speed
(MT/s); Voltage
(V); Slot Per
Channel (SPC)
and DIMM Per
Channel (DPC)
2SPC
1DPC 2DPC
4Gb 8Gb 1.2V 1.2V
RDIMM
SRx4 8GB 16GB 1600 1600
RDIMM
DRx4 16GB 32GB 1600 1600
LRDIMM
QRx4 32GB 64GB 1600 1600
LRDIMM 3DS
8Rx4 64GB 128GB 1600 1600