Supermicro 8028B-C0R4FT, Руководство пользователя

Страница: 12 / 144

1-2
SUPERSERVER 8028B-TR4F/C0R4FT User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 8028B-TR4F/C0R4FT lies the X10QBL-4(CT), a
quad processor serverboard based on the Intel PCH C602J chipset. Below are the
main features of the X10QBL-4(CT). (See Figure 1-1 for a block diagram of the
chipset).
Processors
The X10QBL-4(CT) supports four Intel E7-8800 v3/v4 or E7-4800 v3/v4 series
processors in Socket R1 type sockets. Each processor supports three full-width
Intel QuickPath Interconnect (QPI) links (Data Transfer Rate of up to 9.6 GT/s per
direction) Please refer to our web site for a complete listing of supported processors
(
www.supermicro.com ).
Memory
The X10QBL-4(CT) has thirty-two (32) single/dual/tri/quad channel 288-pin
DIMM sockets that can support up to 1TB of Registered (RDIMM) or 4TB
Load Reduced (3DS LRDIMM) ECC DDR4 1866/1600/1333 MHz speed
S D R A M i n a t w o - c h a n n e l m e m o r y b u s . M e m o r y s i z e s o f
4GB, 8GB, 16GB, 32GB, 64GB and 128GB size @ 1.2V voltages are supported.
Please refer to Chapter 5 for installing memory.
Note:
128 GB can only be supported with 3DS LRDIMM's.
Serial ATA
An on-chip (Intel PCH C602J) SATA controller is integrated into the X10QBL-4(CT)
to provide a six-port SATA subsystem (two SATA 3.0 and four SATA 2.0 ports),
which are all RAID 0, 1, 5 and 10 Windows/LINUX supported. The SATA drives
are hot-swappable units.
Note:
You must have RAID set up to enable the hot-swap capability of the SATA
drives. Documentation on RAID setup guidelines can be found on our web site.
SAS (8028B-C0R4FT Server Only)
A LSI
®
3008 SAS controller is integrated into the serverboard to provide an eight
port SAS (Serial Attached SCSI) subsystem, which is RAID 0, 1 and 10 supported.
The SAS drives are hot-swappable units.
Note:
The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS drives.