Supermicro 8028B-C0R4FT, Руководство пользователя

Страница: 61 / 144

Chapter 5: Advanced Serverboard Setup
5-11
5-5 Installing Memory
Caution!
Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Installing Memory Modules (Figure 5-3)
1. Insert the desired number of DIMMs into the memory slots, starting with
P1M1-DIMMA1. (For best performance, please use the memory modules of
the same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
Lock/Release Tabs
Notches
Release
Release
Figure 5-3. Installing DIMMs
3. Align the key of the DIMM module with the receptive point on the memory
slot.
4. Align the notches on both ends of the module against the receptive points on
the ends of the slot.
5. Use two thumbs together to press the notches on both ends of the module
straight down into the slot until the module snaps into place.
6. Press the release tabs to the locking positions to secure the DIMM module
into the slot.