SuperMax 19-38 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 32

SuperMax 19-38 Скачать руководство пользователя страница 9

9

19-38 DRUM SANDER OWNER’S MANUAL

Quick Set Up Guide to Unpacking

NOTE: FAST LEVER
The fast lever should be in the up-

right position for installation of

the sanding unit. The fast lever

raises the inboard side of con-

veyor up. Do not ever tighten the

bolts all the way down. The fast

lever should always be able to be

moved back and forth between

and up/down position. The bolts

should be tightened, but not so

tight that the fast lever doesn’t

move. The lever should be able to

move from the down to up posi-

tion easily.

10

11

Install two lock washers and two flat

washers on the studs on outboard side of

the conveyor belt.

9

Open BOX 2. Remove conveyor from pack-

aging and place on sanding unit. The con-

veyor motor should be nearest to the main

motor and depth gauge.

Install lock washer and flat washer onto

two socket heads (or hex head bolts) and

install into flange of conveyor bed on in-

board (motor side.) Keep support plate in

place on inboard side and make sure the

fast lever is positioned up.

«
...
7
8
9
10
11
...
»

Содержание 19-38

































Отзывы:

Нет отзывов