SuperMax 19-38 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

SuperMax 19-38 Скачать руководство пользователя страница 6

6

QUICK SET UP GUIDE TO UNPACKING

Your SuperMax 19-38 Drum Sander has been shipped mostly assembled from the factory. If any damage has

occurred during shipping, notify the transportation company as soon as possible and ask for a damage and

loss report. Then notify your dealer of any loss or damage.
Before setting up make sure that the space is adequate for your new equipment. We also recommend that

there is more than one person available for lifting and initial set up procedures.

The SuperMax 19-38 Drum Sander and stand is

shipped in three boxes.

Assemble the SuperMax 19-38 Drum Sander Open

Stand #71938-OP or alternatively, if you have cho-

sen to use your own bench prepare the existing

bench for the sander attachment.

NOTE:

See Open Stand #71938-OP man-

ual included in the Open Stand

shipping box for stand set-up and

directions.

Open BOX 1 that contains the main sanding unit.

Remove the cardboard liner. Open the plastic bag

enclosing the sanding unit.

1

2

NOTE: HARDWARE

There will be a small container

of hardware included with your

sander. This container will in-

clude everything you need to set

up your sander.

NOTE: REQUIRED TOOLS

All of the tools required for set

up are shipped with your sander

and stand.

«
...
4
5
6
7
8
...
»

Содержание 19-38

































Отзывы:

Нет отзывов