manualshive.com logo in svg

SuperMax 19-38, Руководство пользователя, Страница: 2 / 32

Поделиться
Скачать
SuperMax 19-38 Скачать руководство пользователя страница 2

OPERATING YOUR 

19-38 DRUM SANDER

2

To the new SuperMax owner:

SuperMax takes pride in our products and stands 

behind them with continuing service and support 

for our customers. Your SuperMax Sander was de-

signed with several features that will bring a new 

dimension of productivity to your shop. Our goal at 

SuperMax is to develop machines that provide you 

with maximum performance, maximum economy 

and maximum utility.

Your SuperMax 19-38 Drum Sander has features 

that will give you better results in less time in the 

years ahead. This sander is designed to be tailored 

to every project and features ultra-precise control 

for any sanding project. 

This sander is covered with a warranty and your 

dealer can answer any questions you may have. 

Additionally, we will always be here to offer sup-

port, service information, and product supplies and 

services.

Before using your sander for the first time learn 

how to use it. This manual covers unpacking step-

by-step, sander set up and fine-tuning the controls. 

Safety information is also provided to makes sure 

your process is hassle free. If you have any ques-

tions this manual will provide answers and you can 

also refer to our website or customer service for 

any updates or further details. 

SuperMax Team

Write your model and machine number in this 

manual for any questions or ordering information:

CONTACT INFORMATION FOR SUPERMAX

SuperMax Tools

1275 Corporate Center Drive

St. Paul, MN 55121

Phone:

 651-454-3401

Toll Free:

 888-454-3401

Fax:

 651-454-3465

[email protected]

www.supermaxtools.com

IDENTIFICATION INFORMATION

Model # 71938-D

Serial #  ______________________________________________

Purchase Date  _______________________________________

Dealer Info  __________________________________________

________________________________________________________

________________________________________________________

WARRANTY

The SuperMax 19-38 Sander comes with a two-

year limited warranty. We will provide replace-

ment parts if found to be defective materially or 

in workmanship.

Содержание 19-38

































Отзывы:

Нет отзывов