background image

3

Misc. Codes / Standards

The Installation must conform to local codes or, 

in the absence of local codes, with the National 

Fuel Gas Code, ANSI Z223.1/NFPA 54 - latest 

edition.

The appliance, when installed, must be electri-

cally grounded in accordance with local codes or, 

in the absence of local codes, with the National 

Electrical Code, ANSI/NFPA 70 - latest edition.

Check the packaging list to be sure that you have 

all the necessary parts in usable condition. Also 

check for concealed damage.

Tools and Building Supplies

Normally Required

Tools Should Include:

•  Phillips screwdriver

• Hammer

•  Saw and/or sabersaw

• Level

•  Measuring tape

•  Electric drill and bits

• Pliers

• Square

•  Piping complying with local codes

•  Pipe wrench

•  Tee joint 

•  Pipe compound

Building Supplies Should Include:

•  Framing materials

•  Wall finishing materials

•  Caulking materials 

(noncombustible)

•  Fireplace surround materials 

   

(noncombustible)

• Insulation

 

(for packing around gas-line penetration holes)

Codes

Adhere to all local codes or in their absence 

the latest edition of The National Fuel Gas Code 

ANSI Z223.1 or NFPA 54 - latest edition which 

can be obtained from The American National 

Standards Institute, Inc. (25 West 43rd Street, 

4th floor New York, NY 10036) or National Fire 

Protection Association, Inc. (1 Batterymarch 

Park Quincy, MA 02169-7471).

TABLE OF CONTENTS

Important Safety Information ........... Page 2

Packaging List .................................. Page 3

General Information ......................... Page 3

Burn-in Period .................................. Page 3

Tools/Building Supplies .................... Page 3

Codes ............................................... Page 3

Combustion And Ventilation Air ....... Page 4

Cold Climate Insulation .................... Page 4

Requirements for the 

   Commonwealth of Massachusetts Page 5

Location Of Firebox .......................... Page 6

Clearances ....................................... Page 6

Assembly Steps ............................... Page 8

Gas Line Installation ......................... Page 8

Firebox Framing ............................... Page 9

Firebox Installation ........................... Page 9

Specifications ................................... Page 10

Framing Specifications ..................... Page 11

Hood Installation .............................. Page 11

Optional Equipment / Blower Kit 

     Installation .................................. Page 12

Firebox Finishes ............................... Page 15

Accessories/components ................. Page 15

Replacement Parts List .................... Page 17

Warranty .......................................... Page 19

This installation manual will help you obtain 

a safe, efficient, dependable installation for 

your appliance and vent system. 

PLEASE READ AND UNDERSTAND 

THESE INSTRUCTIONS BEFORE BEGIN-

NING YOUR INSTALLATION.

Packaging List

Vent-Free Gas Firebox

Hood

Installation and Operation Instructions

 

GENERAL INFORMATION

These Vent-Free firebox enclosures are designed 

to accept all ANSI Z21.11.2 approved Decorative 

Type Vent-Free Gas Log Room Heaters.  

For the 

appropriate Vent-Free Gas Log Room Heater 

model, refer to Page 16 (see 

Vent-Free Gas Log 

Sets)

.  

Refer to the installation instructions pro-

vided with the log sets for detailed instructions.

This installation manual along with the vent-free 

gas log installation manual will enable you to 

obtain a safe, efficient and dependable instal-

lation of your room heater system.

Do not alter or modify the firebox or its 

com ponents under any circumstances. Any 

modification or alteration of the firebox system, 

including but not limited to the firebox and ac-

cessories, may void the warranty, listings and 

approvals of this system and could result in an 

unsafe and potentially dangerous installation.

These Built-In Vent-Free Fireboxes have been 

tested and approved as Ventless Firebox Enclo-

sures for Gas-Fired Unvented Decorative Room 

Heaters to ANSI Z21.91.

CONGRATULATIONS!

In selecting this 

Superior

®

 Vent-Free Gas Firebox you have chosen the finest and most 

dependable fireplace to be found anywhere.  A beautiful, prestigious, alternative to a wood 

burning fireplace.  Welcome to a family of 

Superior

 Fireplace Owners.

Please read and carefully follow all of the instructions found in this manual.  Please pay 

special attention to the safety instructions provided in this manual.  The Homeowner's 

Care and Operation Instructions included here will assure that you have many years of 

dependable and enjoyable service from your 

Superior

 product.

Burn-in Period

During the first few times of operation of this 

appliance there will be some odor due to the 

curing of the paint and burning off of lubricants 

used in the manufacturing process. We recom-

mend that you open windows and ventilate the 

house during the initial burns. The paint emits 

non-toxic odors during this process.

Depending on your use, the burn-in period may 

take a few hours or a few days.

KEEP YOUR HOUSE WELL VENTILATED 

DURING THE BURN-IN PERIOD.  THE ODOR 

AND HAZE EMITTED DURING THE BURN-IN 

PERIOD CAN BE QUITE NOTICEABLE AND MAY 

SET OFF A SMOKE DETECTOR.

If an optional blower is installed, Do not turn 

it on during the Burn-In period.

Содержание VRT3132F





















Отзывы: