42
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Care and Operation
901140-00, 01/2021
Innovative Hearth Products
DRT63ST-B Power-Vent Direct-Vent Fireplaces
To turn OFF the Appliance:
Using the Receiver:
Manually slide the
three-position slider to the "OFF" position.
Using the Remote Transmitter:
Press the
ON/OFF key.
The burner and pilot should turn off immedi-
ately. The blower will continue to run for about
90 seconds and then stop.
Figure 63 - Receiver
Remote
Off
On
PRG
Three-Position Slider Switch
(in REMOTE position)
Hot Fireplace Will Cause
Severe Burns
Never Allow Children to
Touch Glass or other Fire-
place Parts
WARNING
Figure 64 - Remote Transmitter
Blue LCD Display
ON/OFF Key
ROOM
TEMPERATURE
Key
UP/DOWN
Arrow Key
MODE Key
Figure 66
Flame Level 5
Figure 67
Flame Level Maximum
Key Lock
This function will lock the keys to prevent
unsupervised operation. To activate this func-
tion, press the MODE and UP keys at the same
time. To deactivate this function, press the MODE
and UP keys at the same time.
Manual Bypass of the Remote System
If the batteries of the Receiver or Transmitter
are low or depleted, the appliance can be turned
on manually by sliding the three position slider
switch to the ON position. This will bypass the
remote control feature of the system and the
appliance main burner will come on if the gas
valve is in the "ON" position.
Figure 65 - Indicator Icons
Transmission
Set Point
Temp./Level/State
Flame On
Child Safety Lock-Out
Low Battery Alarm
Room Temperature
Maximum Level Indicatiors
POWER VENT APPLIANCE
OPERATING INSTRUCTIONS
To turn ON the Appliance:
Using the Receiver:
Manually slide the
three-position slider to the "ON" position.
Using the Remote Transmitter:
Manually
slide the three-position slider on the Re-
ceiver to the "ON" position, and then press
the ON/OFF key on the Remote Transmitter.
The blower should start immediately. The
igniter will start sparking, and then the pilot
will light. After a few seconds, the burner
should light.