29
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Installation Instructions
901140-00, 01/2021
Innovative Hearth Products
DRT63ST-B Power-Vent Direct-Vent Fireplaces
9. Place Log "J" on top of Logs "E", "G", and "H" (
see
Figure 48
).
Log "E"
Log "H"
Log "G"
Log "J"
Figure 48
10. This completes installation from the control side of the unit. The
rest of the log installations will take place on the non-control side
of the unit.
11. Place Log "D" on the 1st, 2nd, and 3rd Grate Fingers. NOTE:
Notches are for the 2nd and 3rd Grate Fingers (
see
Figure 49
).
1st Grate Finger
2nd Grate Finger
3rd Grate Finger
Log "D"
Figure 49
12. Place Log "F" on top of Logs "D" and "A" (
see
Figure 50
).
Log "F"
Log "A"
Log "D"
Figure 50
13. Place Log "I" on top of Log "D" and in contact with Log "F". NOTE:
The charred end should be resting on the burner assembly (
see
Figure 51)
.
Log "D"
Log "I"
Log "F"
Figure 51
14. Place Log "K" on top of Log "D" and in contact with Log "C". NOTE:
The charred end should be resting on the burner assembly (
see
Figure 52
).
Log "D"
Log "K"
Log "C"
Burner Assembly
Figure 52
15. Installation is now complete. Please NOTE that these Logs should
not have a large amount of flame impingement and may require
slight adjustment to Log position and/or Air Shutter position.
Burner Assembly