Operation
900298-00, 10/2014
Innovative Hearth Products
Superior
TM
DRT/DRC3500 Series Direct-Vent Gas Fireplaces
57
Installing the DRT3500 Series 40” and 45” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Table 35: DRT3500 40” and 45” Log Sets
1
3
2b
4
2a
Log Number
Description
1
Rear Left Log
2a
Center Log
2b
Center Log Attachment
3
Right Front Log
4
Left Front Log
Catalog number for the entire set:
F2195 for DRT3500 40” Series
F2197 for DRT3500 45” Series
1.
If necessary, remove the glass door (
Page 58
). Locate and bend up the log placement brackets (
Figure 52
).
Figure 52: Locating the log placement brackets
Figure 53: Placing logs 1 and 2a
Left and Right Rear Log Bracket
Left Front Bracket
Right Front Bracket
2a
2.
Position rear left log (1) on the left rear log bracket (
Figure 58
)
3.
Position the center log (2a) against the log grate and to the rear of the fireplace (
Figure 58
).
Figure 54: Placing log 2b
Figure 55: Placing log 5
2b
2a
3
4.
Position the center log attachment (2b) at the right end of the center log (2a) (
Figure 59
).
5.
Position the right front log (3) on the center log attachment (2b) and the left front log (4) over the center log (2a)
(
Figure 60
).
1
4
