Operation
900298-00, 10/2014
Innovative Hearth Products
Superior
TM
DRT/DRC3500 Series Direct-Vent Gas Fireplaces
56
Installing the DRT3500 Series 35” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Table 34: DRT3000 35” Log Set
1
3
4
2
Log Number
Description
1
Rear Left Log
2
Rear Center Log
3
Right Front Log
4
Left Front Log
Catalog number for the entire set: F2193 for DRT3500 35” Series
1.
If necessary, remove the glass door (
Page 58
). Locate Log Placement Brackets (
Figure 59
).
2.
Bend up the log placement brackets (
Figure 50
). Place embers and other media (see
Page 51
).
Figure 48: Locating the log placement brackets
Figure 49: Placing log 1 and 2
Left and Right Log Placement Brackets
2
3.
Align the notches in the read left log (1) with the left rear brackets (
Figure 51
).
4.
Position the rear left log (1) at the left rear of the firebox (
Figure 60
) and the Rear Center Log (2) on the left and
right log placement brackets (
Figure 59 and 60
).
Figure 50: Placing log 3
Figure 51: Placing log 4
3
4
5.
Position the right front log (3) on the right front log bracket and the right of the rear center log (
Figure 61
).
6.
Position the left front log (4) on the left of the rear center log (1) and right front log (5) on the right rear of the
back center log (
Figure 62
).
1
