SuperiorFireplaces.US.com
900806-00NC
13
Complete your gas installation by connecting incoming gas line with fl exible gas line. Secure tightly with wrench but DO NOT OVERTIGHTEN.
EMBER AND PAN MATERIAL PLACEMENT
1. Open bag(s) of vermiculite and fi ll entire burner pan until burner tube is completely covered
(see
Figure 19
).
2. Smooth pan material just even with edges of burner pan.
3. Remove ember material from bag and fl atten small amounts into quarter size pieces and lay on top of surface of pan material
(see
Figure 20
).
4. Place just enough to cover entire surface and leave about a 1/2" gap under lower grate members to allow air to fl ow
(see
Figure 21
)
.
Figure 18 - Connecting Flexible Gas Line to Millivolt Valve
P
IL
O
T
ON
OFF
IN
OUT
Gas Shutoff Valve
Flexible Gas Line Do
NOT Kink
1/2" NPT Incoming
Gas Line
NOTE:
1) Wire Connections
Not Shown for Clarity
2) * 1/8" NPT Plugged
Tapping
Red Surface Indicates For
Propane/LP Use Only
Pilot Adj.
Inlet Pressure Tap
Outlet Pressure Tap
Figure 19 - Fill Entire Burner Pan with Vermiculite
Figure 20 - Ember Material on Surface of Pan Material
(Vermiculite)
Vermiculite (Pan
Material)
Burner Pan
Grate
Ember
Material
Burner
Pan
Vermiculite
(Pan Material)
Grate
INSTALLATION
Continued
Figure 21 - Pan and Ember Material Clearances
0.5"
0.5"
Grate
Burner Pan
Pan and Ember
Material
