Superabrasive LAVINA 38GR -X, Руководство пользователя

Страница: 21 / 58

Superabrasive
Owner’s Manual Original Language – Lavina
®
38GR-X 08/2017
21
Figure 7.2
Figure 7.3
Return machine to authorized service center for overall checkup of the Engine. For Propane safety, have
the machine serviced by a Certified Technician , including emission check.
CHECK EVERY 400 WORKING HOURS
Besides the checks of 200 working hours, replace sealer and V-rings like described in chapter
“
DISMOUNTING TOOL
HOLDERS TO CHANGING V-RINGS AND FELT-RINGS
”.
Remove the protective covers under the generator. Check the belt that moves the generator. If necessary tighten it
making sure not to
“over tension”, never tighten it to the first given values. Replace it if necessary.
Return machine to authorized service center for overall checkup of the Engine. For Propane safety, have the
machine serviced by a Certified Technician, including emission check.
VACUUM
As stated previously, frequently check hoses and other parts for clogging.
WATER LEAKS
Replace any leaking parts immediately as the water could damage your machine
ELECTRICAL SYSTEM
Dust should not enter the control box, as it will destroy the contacts. Remove (blow out) any dust present.
MECHANICAL PARTS
Parts such as the belt, seal rings, cap rings, spiders and buffers and guard assembly are subject to wear and should be
replaced as needed.
CARRIAGE WHEELS
Check the pressure of the pneumatic tires and maintain it at the limits of 3.5-4 atm/50...60PSI/.
PROPULSION BATTERY
The machine uses a maintenance-free battery. The battery charges
automatically during work.
Self-propelled movement of the machine is possible only when the
engine is started.
Violation of this requirement may lead to the destruction of the
battery.
The approximate battery charge level can be checked on the Indicator
Lights (Fig.7.3) that is noted in the operating manual of the control box
built-in DC-to-AC Inverter/Chargers.
Upon long outage of the machine (more than one week), it is
recommended to switch off the battery of the system by the safety switch
on the bottom part of the board (Fig.7.2), or to unplug the battery cables.
PANEL BATTERY
The status of the panel battery is displayed on the right upper corner of
the screen. If the batteries are run down, they should be changed or the
panel should be connected with the cable (see.Fig.4.8; Fig.4.9; Fig.4.10),
allowing the batteries to recharge.