Superabrasive LAVINA 38GR -X, Руководство пользователя

Страница: 13 / 58

Superabrasive
Owner’s Manual Original Language – Lavina
®
38GR-X 08/2017
13
Figure 3.18
Figure 3.17
RELEASING THE WHEELS OF THE CARRIAGE
If for some reason the movement of the machine is not possible on its own power (using the third wheel), it can
be moved by the operator on the two wheels of the carriage.
Each of the wheels can be released from its gearing to the drive shaft by unscrewing the bolt (Fig.3.14-1) by 3 revs.
The saw blade bushing, which transmits the movement between the shaft and the wheel, is released this way. To
unscrew the bolt a 19mm (3/4 in) wrench is needed (Fig.3.15). When engaging or disengaging the hub of the wheel,
lift the carriage so the wheel does not touch the floor and is free to rotate (Fig.3.16).
STORAGE
Always store and transport the Lavina
®
38GR-X in a dry place. Never transport the Lavina
®
38GR-X unprotected; it may
be damaged if transported unprotected during rain or snow.
When the temperature may fall to 32F (0 o C) or less during the storage of the machine, water should be
emptied from the system using the following steps:
- Pull out the hose of the tank (Fig.3.17) (Fig. 3.18 -3).
- Turn on the pump and shift the tap (Fig. 3.18 -4) in the two positions until the water drains from the hoses.
- Pull out the two hoses
(Fig. 3.18 -1 and 2) and repeat the
above steps. Then reattach all hoses.
Figure 3.15 Figure 3.14 Figure 3.16