Superabrasive LAVINA 38GR -X, Руководство пользователя

Страница: 15 / 58

Superabrasive
Owner’s Manual Original Language – Lavina
®
38GR-X 08/2017
15
REMOTE CONTROL PANEL
The Control Panel can work connected to the machine or as a remote control device.
When connected to the machine, it should rest on the plate below which the transmitter is mounted. To connect the
device, screw the protective cover from the plug on the remote control panel (Fig. 4.6), then unscrew the nut of the plug
connecting the cable to the transmitter and connect the plug to the panel (Fig. 4.8). Use the protective cover to replace
the plug on the transmitter (Fig. 4.9).
When the panel is working as a remote control device, the cable should be connected to the transmitter.
1. Plug with closure used to connect the panel to the
machine through a cable
2. Emergency STOP button used in Emergency
situations for stopping the machine. Turn on/off the panel .
3. Switch Reset
- forward position activates the initial setting on the
control panel
- back position resets the alarm of the inverters
4. Start/Stop clutch Start will electronically activate the
grinding plates to spin; stop will disconnect engine from
grinding heads
5. Switch on/off the spotlights
6. Joystick
presets the moving direction of the machine
7. Free switch
8. Switch presets moving speed of the machine
9. LCD
– Display :
- indication of the preset rotation speed of the working plates
- indication of the preset speed of the machine
- emergency stop button report
- report - "inverter fault"
- movement direction "forward"
- movement direction "back"
10. ON/OFF switch starts/stops the engine
11. ON/OFF switch control the water pump
rpm
engine rpm
tools
2000 420
2100 440
2200 460
2300 480
2400 500
2500 520
2600 540
2700 563
2800 585
2900 605
3000 625
3100 645
3200 670
3300 690
3400 710
3500 730
3600 750
Figure 4.5
Figure 4.6 Figure 4.7 Figure 4.8 Figure 4.9
Figure 4.10