Sunways NT 2600 Скачать руководство пользователя страница 42

Страница: 42 / 86

128

from ICP-Deutschland, (available from your

specialist dealer), which will guarantee

reliable data transfer.

The addresses of the solar inverter must

be input with the Sunways NT Monitor

software. Alternatively, see chapter 2.4

«Commissioning, configurations».

Initialising the remote modem

If a remote modem is installed in the solar

inverter, it must be initialised using a PC

and the Sunways NT Monitor software.

· Connect the powered remote modem to

the PC via the COM port. Use the inter-

face cable provided with the modem for

this purpose. Start the Sunways NT

Monitor and set «Acer Modem» under

the «Settings/Remote Modem» menu.

· Click «Perform initialisation» and wait

until the scroll bar has come to an end.

The modem can now be switched off

and connected to the solar inverter via

the RS 232 interface.

· Attention! Do not initialise the local

modem which is intended for use on

the PC!

· The remote modem is now initialised

so that it automatically accepts a connec-

tion after two rings and connects at

9600 Baud.

Содержание NT 2600























































































Результаты поиска

Содержание NT 2600

Отзывы:

Бренды по названию

Популярные бренды

Sunways NT 2600, Руководство пользователя

Результаты поиска

Содержание NT 2600

Отзывы:

Бренды по названию

Популярные бренды