Sunways NT 2600, Руководство пользователя

Страница: 40 / 86

126
Data memory
Your solar inverter is equipped with an
internal data memory as standard. This
data memory provides you with a detailed
view of the mode of functioning and the
relevant values of your solar power supply
at all times. You can access these data
with the help of the NT Monitor software
described below. The following measured
values can be determined:
· DC voltage
· AC voltage and AC current (power calcu-
lation)
· Irradiation and module temperature
(if a sensor is connected)
· Time and date
The following values are accumulated,
stored and continuously overwritten:
· 15 minute values for AC current, DC and
AC voltages, irradiation and temperature
· 500 times storage of 15-minute average
values in the recirculating storage; stora-
ge depth: ten days on average, then
overwriting of values
· Storage of accumulated daily work in
Wh and of 40 daily values in the recircu-
lating storage and successive overwriting
of values
· Storage of accumulated monthly work in
kWh and of 13 monthly values in the
recirculating storage, then overwriting
of values
· Storage of faults with max. ten values,
then successive overwriting of values
Please note that all displayed data are
displayed with a nominal measuring accu-
racy of maximum 5 per cent. The energy
counter of your EVU should be used as
absolute reference for the fed-in energy.