Suntex CT-6110-POL, Руководство по эксплуатации

Страница: 47 / 80

7.15 Date/Time(Clock)
Enter setup of Date/Time(Clock). Set the “Year”, “Month”, “Date”, “Hour”, and “Minute” time. Note:
If you select to turn off the clock function, there will not display clock under measurement mode. The
calibration time of calibration record will also show ”OFF” under calibration overview display.
Note: Only when the inner battery is out of power, the clock may stop operation. Then, please
replace the 3V CR2025 Li batter inside the transmitter.
Press or to
set the year.
Enter “ RS-485 Communication ” Setup
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press or to
set the month part, and
press to adjust
the date part.
Press or to
set the hour part, and
press to adjust
the minute part.
Press or to
select turning on or off the
clock. If select turning off,
then enter the RS-485 setup.
43