SUNSTONE Orion 150s Series, Руководство пользователя

Страница: 7 / 48

Questions? Call or Text +1-801-658-0015 •
3
The Micro Welder Experts
(1) Flat Mounting Plate (H)
(3) Flat Head Hex Screws (G)
(1) Long Carriage Bolt (F)
(1) Flat Pressure Plate (I)
(1) Adjustment Knob (J)
• As shown in Figure 3.1, using a 4mm (5/32”)
Allen wrench, unscrew the flat head hex screws
(G) holding the mounting plate (H) to the arm.
• Run the included 8mm (5/16”) carriage bolt (F)
through the included mounting plate (H).
• Attach mounting plate (H) to the bottom of the
arm using (3) flat head hex screws (G).
• Drill a 3/8” (9.5mm) hole through the tabletop.
• Lower the arm so the bolt goes through the
hole in the tabletop. See Figure 3.2.
• Slide the flat pressure plate (I) onto the bolt.
Turn the adjustment knob (J) clockwise to
tighten the plate to the underside of the table.
Mounting Option 3 - Screw to Table (vertical
surface)
Required hardware from Box 2:
(1) Angled Mount Bracket (A)
(3) Flat Head Screws (G)
(2) Wood Screws
(not included)
• Attach the angled bracket (A) to the bottom
of the arm assembly using three (3) of the
included flat head hex screws (G) as shown in
Figure 2.1.
• Lift and position the arm assembly onto the
table in the desired location.
• Run wood screws through the bracket (A) and
into vertical surface of the table, as shown in
Figure 3.3.
Figure 3.1. Remove the plate from the arm,
run the carriage bolt through the plate, then
re-attach the plate to the arm.
Figure 3.2. Lower the arm so the bolt goes
through the hole in the table. Turn the twist
knob clockwise to tighten the plate to the
table.
Figure 3.3. Use wood screws (not included)
to attach the angled bracket (A) to the table.