SUNSTONE Orion 150s Series, Руководство пользователя

Страница: 11 / 48

Questions? Call or Text +1-801-658-0015 •
7
The Micro Welder Experts
Power Supply Setup - Back Panel
Reference Figure 7.1 and follow these instructions (all
required cables are found in the accessories box).
• Plug the female end of the included power
cable into the 90-250 VAC Power Port (F).
• Connect the male end of the power cable
into AC power (wall outlet). The Orion s series
can accept voltages ranging from 90VAC to
250VAC. (When plugged in for the first time the
Power Button LED will blink a couple of times
and then turn off.)
• Insert the included 1/4” gas tube firmly into the
Shield Gas Port (C). The tube may feel loose
when connected but should not come out if
pulled.
• Plug the foot pedal cable into the Foot Pedal
Port (D).
• Insert the stylus connector into the Weld Stylus
Port (H) on the back panel of the power supply.
Ensure that the white circular indicator on the
stylus is lined up with the white indicator on the
Weld Stylus Port. The connector will snap into
place.
• When making welds using the stylus, an alli-
gator clip cable can be connected to the Pulse
Arc+ Port (G) on the back of the power supply
for grounding the work piece during the weld.
• When tack welding, plug one alligator clip cable
into the Tack+ Port (A) and one into the Tack-
Port (B). Be sure to attach each alligator clip to
each work piece before tacking the two pieces
together.
• As instructed previously on page 4, connect the
Shutter Cable to the Shutter Port (E).
Note: Connecting other display port compatible devic-
es to the Orion 150s’s Shutter Port may damage the
welder and/or the other devices.
Figure 7.1. Back panel of the Orion 150s.
A
B
C
G
H
D
E
F