SUNSTONE Orion 150s Series, Руководство пользователя, Страница: 16 / 48

12
• Questions? Call or Text +1-801-658-0015
Orion
™
150 s Users Guide
Off Mode. While the welder is in Weld Off Mode, it will
not be able to make a weld when the work piece touch-
es the electrode.
• Rest your hands on the table and position the
work piece close to the welding electrode
before looking into the microscope.
• Make sure your focus is at the tip of the elec-
trode.
• Use slow, controlled movements.
• It is helpful to have your hands resting on the
table and to only use your fingers to move the
work piece up to the electrode. See Figure 12.1.
• Place the work piece surface perpendicular
to the point of the electrode. As discussed
in later chapters, the angle of the electrode
tip relative to the work piece surface is very
important and will take practice.
• Now practice making soft contact with the work
piece to the electrode.
• Once you feel comfortable, attach the alli-
gator clip to the work piece and enable welds
(switching the unit to Weld On Mode) to begin
welding. Be mindful of your energy setting:
Too much power may damage the work piece.
Figure 12.1. Rest your hands on the table and position the
workpiece close to, but not touching the electrode., Then look
through the microscope.