SunStar SPS/F-1811 Series, Руководство пользователя

Страница: 18 / 57

15 16
4.9.1) Connection of the compressed air
1) Connect the air hose to the quick joint socket.
2) Fasten the quick joint socket with the quick joint
plug.
3) Open the slide valve to inflate air. Then adjust the
air pressure at 0.44~0.54 MPa (5~5.5 kgf/cm 2 )
[Reference] When closing the slide valve after
using it, the remained pressure is
indicated to 0 MPa) 0kgf/cm
2
) as the
remained air is automatically released.
4.9 How to inject compressed air and adjust the air pressure
4.9.2 How to adjust the air pressure
- Pull the handle for the adjustment which is located
in the upper part of the filter adjuster attached to the
rear of the table and turn it clockwise to increase the
pressure. Turn it counter clockwise to decrease the
pressure. Accordingly control at a proper speed of
0.44~0.54 MPa (5~5.5 kgf/cm
2
) and then push the
handle for the adjustment as it was to fix
Caution
When the air pressure goes down during working (less than 4kgf/cm
2
), an error is indicated
and the machine takes a pause.
Caution
When attaching, the parts may fall down, which cause an injury. Please be cautious not to be
hurt when using the tools.
Caution
To prevent safety accident, implement this work when the power is not connected.
<Picture 4-11>
Air hose
quick joint socket
flug
slide valve
<Picture 4-10>