Sunstar Precision SWF/TA-WJ614-100, Руководство пользователя

Страница: 23 / 115

24
3) Forward Frame Movement While the Embroidery Work is Stopped
4) For backward non-stitching while the embroidery work is stopped
Same as Bar Switch operation
5) Performing Work Other Than Embroidery
If you want to perform a solenoid test, a thread break sensor test, or manual trimming, select the function
and press START.
Bar Switch Operation MACHINE OPERATION
Push it to the right side once The machine moves forward by the embroidery frame feed unit
(see Note2).
Push it to the right side continuously The machine starts moving forward.
When the bar switch is released before the embroidery frame moves
ten times, the frame is immediately stopped.
When released after the embroidery frame moves forward 10 times or
above in a row by the feed unit, the frame continues to move forward by
the unit of 10 needles.
Push it to the left side and release it While the embroidery frame continues to move forward, and the bar
switch is pushed to the left again, the forward movement of the
embroidery frame is stopped.
Select function Push Bar Switch to the right side
1) “Inching” refers to low-speed embroidery at a 100 rpm range, performed for stable stitching
when the machine is re-started after stop.
2) “Frame movement unit parameter” refers to the “BK STITCH UNIT” in “SET-UP 1”. You can
select from 1 to 10 stitches by 1 stitch.
CAUTION