Sunstar Precision SWF/TA-WJ614-100, Руководство пользователя

Страница: 15 / 115

16
2) Locations of level gauge
– Place the level gauges at the locations as in the figure below to maintain the balance of the machine.
3) Leveling fixation
– When the left and right balancing is completed, turn the supporting bolt of the frame until it reaches the
level base and loosen it by turning in the reverse way by a 1/4 circle.
– When the supporting bolt adjustment is completed, tightly fasten the nut for fixation.
Level Gauge
Supporting bolt
Nut
Level Gauge
Until the height difference between the four adjusting bolts becomes 10mm, use the spacer
by holding it against the lower balancing base.
CAUTION
Do not place the level gauges on the square pipes and the table for maintaining the balance
of the machine.
CAUTION
The supporting bolt at the center reduces the machine vibration and maintains its
horizontal balance.
CAUTION