Sunquest PRO 24RS, Инструкция по сборке и эксплуатации

Страница: 18 / 23

Removing/Replacing Lamps
After removing the acrylic shield, replace
lamps as follows:
Step 1. Grasp the lamp at one end and
at the middle, then turn the
lamp a quarter turn. The lamp
may then be gently removed
from its holder.
Step 2. To re-install a lamp, insert the
pins located on the ends of the
lamp into the slots on top of the
lamp holder and turn the lamp a
quarter turn.
14
Care & Maintenance-Replacing Lamps
Application
Canopy and Bench
Facial Unit
Lamp Model Number
Diamond Sun ® S Wolff ® Model 71T12100W
Diamond Sun ® S Wolff ® Model 59T12080W (24RSF only)
Velocity TM Wolff ® Model 71T12100W
Velocity TM Wolff ® Model 59T12080W (24RSF only)
Philips Model HPA 400/30s
CosmoTech Model 23045
CosmoTech Model 20046
Only the following lamp types have been certified for use in SunQuest Solariums
Application
Canopy and Bench
Turbo Face Tanner
Lamp Model Number
Diamond Sun ® S Wolff ® Model 71T12100W
Velocity TM Wolff ® Model 71T12100W (24RST only)
Turbo Sun TM S Wolff ® Model F8-T5-10W
Only the following lamp types have been certified for use in SunQuest Solariums
Application
Canopy and Bench
Lamp Model Number
Diamond Sun ® S Wolff ® Model 71T12100W
Only the following lamp types have been certified for use in SunQuest Solariums
Recommended Replacement Lamps
Do not use lamps other than those speci-
fied below. The use of uncertified lamps
is a violation of Federal regulations and
will void your warranty. These lamps have
an average life span of 800-1000 hours of
effective tanning use. Lamps used longer
than that begin to lose their effectiveness
even though they will continue to light.
Pro 24RS
Pro 24RSF
Pro 24RST
Pro 26RST
Pro 26RS