SunMaxx Solar SmartMaxx-Pro-XL6D, Руководство по установке

Страница: 4 / 51

SunMaxx Solar | 5098 NY 206 Bainbridge NY 13733 | 1.877.786.6299 1.877.270.7875 fax | www.sunmaxxsolar.com
DANGER
Changes to the unit can compromise the safety and function of the unit or the entire system.
A.5 WARRANTY AND LIABILITY
The controller has been manufactured and tested with regard to high quality and safety requirements. The unit is subject to the statutory guarantee
period of two years from the date of sale.
The warranty and liability shall not include, however, any injury to persons or material damage that is attributable to one or more of the following
causes:
- Failure to observe these installation and operating instructions
- Improper installation, commissioning, maintenance and operation
- Improperly executed repairs
- Unauthorised structural changes to the unit
- Installation of additional components that have not been tested together with the unit
- Any damage resulting from continued use of the unit despite an obvious defect
- Failure to use original spare parts and accessories
- Use of the device for other than its intended purpose
- Operation above or below the limit values listed in the specifi cations
- Force majeure
A.6 ABOUT THE CONTROLLER
The Temperature Difference Controller Pro-XL6D facilitates effi cient use and function control of your solar or heating system. The device is impres -
sive most of all for its functionality and simple, almost self-explanatory operation. For each step in the input process the individual entry keys are
assigned to appropriate functions and explained. The controller menu contains headwords for the measured values and settings, as well as help
texts or clearly-structured graphics. The Pro-XL6D can be used as a solar controller for the various system variants illustrated and explained under
„D.3. - Hydraulic variants / Schemes / Systems“ on page 11.
Important characteristics of the Pro-XL6D :
- Depiction of graphics and texts in a lighted display
- Simple viewing of the current measurement values
- Analysis and monitoring of the system by means of statistical graphics,etc.
- Individual confi guration of special functions
- Extensive setting menus with explanations
- Menu block can be activated to prevent unintentional setting changes
- Resetting to previously selected values or factory settings
- A wide range of additional functions are available.
A.7 SCOPE OF SUPPLY
- Solar controller XTDC
- 3 screws 3,5x35mm and 3 plugs 6mm for wall installation
- 12 strain relief clips with 24 screws, replacement fuse 1x T2A / 250V
- Installation and instructions manual XTDC
Optionally contained depending on design/order:
- 2-8 PT1000 temperature sensors and immersion sleeves
- Ethernet
Additionally available:
- Pt1000 temperature sensor, immersion sleeves, overvoltage
protection,
- CAN Bus Data Logger