manualshive.com logo in svg

SunMaxx Solar SmartMaxx-Pro-XL6D, Руководство по установке

Поделиться
Скачать
SunMaxx Solar SmartMaxx-Pro-XL6D Скачать руководство пользователя страница 9

SunMaxx Solar  | 5098 NY 206 Bainbridge NY 13733  |  1.877.786.6299  1.877.270.7875  fax  |  www.sunmaxxsolar.com

C.4 RC 21 REMOTE ADJUSTER WITH THERMOSTAT

 

The remote adjuster with integrated thermostat RC21 provides you with easy to use temperature controlled adjustment of heating from within your 
living space.

Settings

The dial is used to parallel translate the heating curve. The fl ow temperature (still regarding the outdoor temperature) is raised or lowered respec

-

tively by your adjustement by max. 5°.

Sensor

The RC21 contains a temperature sensor which is used by the controller. If the settings in the controller allow it, the sensor is used to alter the fl ow 
temperature.

The switch changes the operation mode of the controller.

               In Timer mode the temperature is controlled according to the set thermostat periods.

               In Continous day mode the set periods are ignored and the temperature is controlled according to the Day time settings.

               In Continous night mode the temperature is usually set to lowest. This setting is best suited for periods of long absence like e.g. holidays.

Installation

Carefully remove the dial from the casing with a screwdriver.
Loosen the screw beneath. Remove the bright part of the casing from the black socket.

The RC21 is connected via terminal block to the controller.

Clamp connections:

     1: Remote adjuster
     2: Sensor
     3: Sensor earth

CAUTION

The RC21 is an optional accessory and is not supplied by default.
The PRO-XL6D is fully functional without RC21

Connection for remote adjuster (grey)

Connection for sensor (green)

Connection for sensor earth (white)

DANGER

Connecting only low voltages

Содержание SmartMaxx-Pro-XL6D




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды