November
2015
Fig.1:
Insert the side with label “Out” of Wall screen 1 (left) (C1) into the bottom slot of Post (B). (
Note: Label “Out” should be on outside
).
Repeat this step for the 3 remaining Wall screens 1 (left) (C1) and all Wall screens 2 (right) (C2).
Fig.2:
Connect Slide rail 1 (long, lower left) (A1) and Slide rail 2 (long, lower right) (A2) to connector 1 (A5) using M6 x 15 mm bolts (AA) and M6
washers (BB). Repeat this step for Slide rail 3 (short, lower left) (A3) and Slide rail 4 (short, lower right) (A4).
Fig.3:
Attach Slide rail 1 (long, lower left) (A1) to Wall screen 1 (left) (C1) and Wall screens 2 (right) (C2) using M6 x 35 mm bolts (DD) and M6
washers (BB). Repeat this step for Slide rail 2 (long, lower right) (A2), Slide rail 3 (short, lower left) (A3) and Slide rail 4 (short, lower right) (A4).
Fig.4:
Attach Slide rail 1 (long, lower left) (A1) to Post (B) using M6 x 25 mm bolts (CC) and M6 washers (BB). Repeat this step for Slide rail 2 (long,
lower right) (A2), Slide rail 3 (short, lower left) (A3) and Slide rail 4 (short, lower right) (A4).
Fig.5-1:
Connect Gutter1 (long, left) (D1) and Gutter 2 (long, right) (D2) to connector 2 (D5) using M6 x 15 mm bolts (AA) and M6 washers (BB).
Fig.5-2:
Connect Gutter 3 (short, left) (D3) and Gutter 4 (short, right) (D4) to connector 2 (D5) using M6 x 15 mm bolts (AA) and M6 washers (BB).
Fig.6:
Attach assembled Gutter1 (long, left) (D1) and Gutter 2 (long, right) (D2) to Wall screens 1 (left) (C1) and all Wall screens 2 (right) (C2)
using M6 x 55 mm bolts (EE) and M6 washers (BB). Repeat this step for assembled Gutter 3 (short, left) (D3) and Gutter 4 (short, right) (D4).
Please pay attention to the connection where the arrow is pointing in above fig. 7, as these parts when assembled should be flat after
assembly.
Out
Out
