background image

November

 

2015

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CARE INSTRUCTIONS

 

Clean gently with a sponge using environmentally-friendly soap and water solution. Do not use abrasive materials, 
such as wire brushes, chemicals, cleansers or bleach. Do not use a pressure washer. Rinse well. Allow to air dry. 
If there are nicks, chips or scratches, go to your local hardware store or home center and obtain a closest match 
touch-up paint suitable for outdoor metal use. Follow instructions that appear on the paint can.   
 

SPECIFICATIONS: 
Resists winds up to 37 mph when firmly anchored using stakes to the ground. 
Resists winds up to 45.6 mph when firmly anchored using expansion bolts into a suitable concrete 
base. 
Roof can withstand up to 210 kg / 462 lbs weight load. 
Maximum load for the center hook: 15 kg / 33 lbs. 

 
 
 
 
 
 
MADE IN CHINA 

Fig.32: 

  Attach Rail track 1 (long, upper left) (I1) to Gutter 1 (long, left) (D1) using M6 x 15 mm bolts (AA) and M6 washers (BB). Repeat this step 

for Rail track 3 (short, upper left) (I3) to Gutter 3 (short, left) (D3). 

Fig.33:

    Attach Rail block slice (I5) to the corner created by Rail track 1 (long, upper left) (I1), Rail track 2 (long, upper right) (I2), Rail track 3 

(short, upper left) (I3) and Rail track 4 (short, upper right) (I4) using M6 x 15 mm bolts (AA) and M6 washers (BB). 

Fig.34:

    Secure the assembled screen room to the ground using

Φ

8 x 260 stakes (II). 

Fig.29: 

  Attach Rail track 1 (long, upper left) (I1) to Movable door 1 (long, left) (F1) through Wheel (H) as per above fig. Repeat this step for Rail 

track 3 (short, upper left) (I3) to Movable door 3 (short, left) (G1). (

Note: The door with IN label should face inside

Fig.30:

    Put the wheel at the bottom of Movable door 1 (long, left) (F1) into Slide rail 1 (long, lower left) (A1). Repeat this step for Movable door 3 

(short, left) (G1) to Slide rail 3 (short, lower left) (A3). (

Note: The screen toward inside

Fig.31:

    Insert Rail track 1 (long, upper left) (I1) to Rail track 2 (long, upper right) (I2). Repeat this step for Rail track 3 (short, upper left) (I3) and Rail 

track 4 (short, upper right) (I4). 

 

IN

E

Содержание 470260











Отзывы: