20
−
Loc
ate and remove factory filter on the top and back of the case.
−
Filter is easily removed and reinserted through the gap in the back of the case.
−
Ensure HEPA filter is clean
.
−
Place HEPA filter on front of factory foam filter
.
−
Re-install filters in blower case.
HEPA Filter
HEPA: (High Efficiency Particulate Air) filter.
NOTE:
HEPA filters aid in contamination control for facilities. HEPA filters do not filter out
gases and odor molecules such as chemical vapors and cigarette smoke.
NOTE:
HEPA filter must be used in conjunction with the manufacturer supplied foam filter.
DO NOT attempt to install HEPA filter without the original equipment foam filter.
NOTE:
Ensure factory open cell foam filter is completely dry before placing HEPA filter in
unit.
NOTE:
The HEPA filter is to be installed in applicable models and pumps in conjunction
with the next factory filter cleaning procedure.
Installation
NOTE:
Installation and/or handling of HEPA filter requires PPE. Service personnel
should wear a mask, gloves, and protective clothing to avoid exposure to possible
contaminants.
NOTE:
Tools are not required for installation of filter.
NOTE:
Ensure unit is off and/or removed from power source prior to servicing or
replacement of filter or HEPA filter.
