6 Parameter Setting
Thermal Imaging Integrated Network Camera
User Manual
28
Issue V1.0 (2018-05-10)
Parameter
Description
Setting
DVE Adjust
The sharpness of normal thermo graphic images
is lower than the visible light and it is difficult to
use the normal thermo graphic images to
identify the original images of the targets. The
image enhancement and edge processing
technology can be used to get better recognition
and distinguishing effects. The dynamic DVE is
classified into six levels, ranging from 0 to 6.
You can set the DVE according to an actual
requirement.
[How to set]
Select by
dragging the
slider.
[Default value]
4
Mirror
Providing the selection of image pixel locations.
Normal: the image is not flipped.
Horizontal: the image is flipped left and right.
Vertical: the image is flipped up and down.
Picture Flip: the image is rotated at 180 degree.
[How to set]
Select from the
drop-down list
box.
[Default value]
Normal
DVE Type
Select a proper DVE mode based on the contrast
and detail characteristics of the image shown.
Available DVE modes include:
Default
Type 1
Type 2
[How to set]
Select from the
drop-down list
box.
[Default value]
Type 1
----End
6.4 FFC Control
Figure 6-4 shows the FFC control interface.
