Thermal Imaging Integrated Network Camera
User Manual
5 Thermal Setting
Issue V1.0 (2018-05-10)
23
Step 2.
Press and hold the left mouse button, and drag in the video area to draw a
temperature area, as shown in Figure 5-3.
Figure 5-3
Alarm Time Setting Interface
Step 3.
Click Apply, the message “Apply success” is displayed, the temperature area is
set successfully.
NOTE
Delete a temperature area:
Step 1.
Select an area ID
Step 2.
Click the temperature area and right-click.
Step 3.
Click Apply, the message “Apply success” is displayed, the temperature area is
deleted successfully.
Step 4
Click
Apply
.
The message "Apply success" is displayed, the system saves the settings.
----End
