Suncast Keystone Garage, Инструкция по сборке

Страница: 3 / 50

Keystone Garage
Assembly Manual
©
Suncast Corporation
revised 10/25/06
Please read through the entire manual before starting!
Note: It is very important that you have a solid, level site for the garden building. If the structure
is being used as a garage for automobiles or other heavy items, the unit must be assembled on
a concrete pad.
When using tools and ladders always follow manufacturer’s recommended safety guidelines!
For proper layout for floor, walls, and roof, please refer to the drawings included throughout
this manual and the set of engineered drawings included at end of manual. The pictures shown
in this manual may depict a different layout, if discrepancies occur always refer to drawings.
Tools Needed:
Level
Screw Gun
Hammer
Tape Measure
Skill Saw
Square
Chalk Line
Pencil
5/16” Drill Bit
Tin Snips
Caulking Gun
Other Items Needed:
Approximately 8 gallons of paint
Approximately 20 Bundles of shingles
Heavy duty Silicone Caulk/Sealer
When your kit arrives, it should look like this.
Inspect the package for any damage that
may have occurred during shipping - dented
corners, punctured plastic, etc. If the pack-
age is damaged, alert HomePlace Structures
immediately - 717.354.2333
14x24 Garage