Suncast Keystone Garage, Инструкция по сборке

Страница: 17 / 50

Step 41: Lift and set wall repeat-
ing steps from back wall. Fasten
wall bottom plate to floor and
siding to floor repeating step 30.
Step 39: Take remaining 16-3/4”x4’ door header siding, mark piece,
cut siding piece to fit using mark and install as shown.
Step 42: Use extra wall stud
to brace wall to floor as shown
(make sure wall is plumb before
fastening).
Step 40: Install remaining siding
pieces.
page 16 ©
Suncast Corporation