Suncast Keystone Garage, Инструкция по сборке

Страница: 25 / 50

page 24 ©
Suncast Corporation
Step 55: Mark last soffit piece and cut so soffit piece is flush with
edge of gable wall siding as shown.
Step 57: Align end rafters with side edge of soffit, and in 1-1/2” in from front of soffit and fasten as
shown.
Note: It is very important for rafter gusset to be facing towards interior of building.
Step 53: First soffit piece should pass end of wall stud 1/2” as
shown (to ensure soffit piece is flush with edge of siding after gable
siding is installed).
Step 54: Install remaining soffit
pieces until reaching last piece.
Step 56: Front soffit is complete,
repeat previous steps on back
wall.
1-1/2” from
edge of soffit
rafter gusset facing
interior of building