![background image](http://html1.mh-extra.com/html/sunbeam/slow-juicer-je9000/slow-juicer-je9000_instruction-booklet_1394385011.webp)
Note: Slow juicer should be completely
assembled before use using directions on
page 7.
1. Ensure the control switch on the juicer is
in the ‘Off’ position and insert the power
cord into a 230-240V AC power outlet and
turn the power ‘On’.
2. Clean and chop fruit and vegetables ready
for juicing.
Note: The feed chute allows some whole
fruit and vegetables to be juiced however
some fruit and vegetables may require other
preparation before juicing, such as peeling
and removing stones.
3. Ensure that the juicer has been assembled
correctly and all parts are firmly in place.
The juicer will not operate if it has not
been correctly assembled.
4. Place the juice container under the juice
spout and pulp container under the waste
pulp spout.
5. Select ‘On’ with the control switch by
pushing the top of the switch.
Important: Do not operate for more than 3½
minutes at a time when juicing heavy loads
Important: Do not use the slow juicer
for extended periods without inserting
ingredients as this can damage the juicer.
6. With the juicer in operation, place the fruit
and vegetables into the feed chute. Using
the pusher, slowly guide the fruit and
vegetables down the feed chute and onto
the juicing screw.
Tip: For maximum juice extraction, allow the
juicing screw to pull the food down into the
juicer and gently use the food pusher when
required.
Important: If the juicing screw becomes
jammed and the juicer stop operating, press
the control switch to the ‘Off’ position. After
the juicer has come to a complete stop,
select ‘Reverse’ at the bottom of the control
switch until the food becomes dislodged.
Then press control switch back to the ‘On’
position.
7. Filtered juice from the fruit and vegetables
will flow from the juice spout and waste
pulp will be collected from the pulp spout.
8. Immediately after use, slowly pour a glass
of water down the feed chute to help clean
your juicer. Ensure that the pulp and juice
containers are positioned to collect the
waste water. This process can also be used
in between juices to flush the slow juicer.
9. When juicing is complete ensure that the
slow juicer is switched ‘Off’ and unplugged
from the power outlet.
Operating your Slow Juicer
9
or continuously for more than 15 minutes.
Содержание Slow Juicer JE9000
Страница 21: ...Notes...
Страница 22: ...Notes...