Sun Microsystems STOREDGE A5000, Инструкция по установке и обслуживанию

Страница: 131 / 146

Appendix D Firmware and Device Driver Error Messages D-5
These messages indicate there is not enough system DVMA or kernel heap resources
available to complete driver initialization. They could also be caused by an
unsupported configuration. The host adapter(s) associated with these messages will
not be functional.
The above messages indicate the SBus slot into which the host adapter is installed
cannot support the features required to operate the disk array. The host adapter
should be relocated to a different SBus slot. If you see this error message, you may
be running an unsupported configuration (for example, you may have the disk array
connected to a server that is not supported).
The above message is displayed only if the
socal
driver was forced into a reset
condition and failed to restart. This indicates of a system resource (kernel memory)
problem.
socal.driver.4020 socal #: alloc of dma handle failed
socal.driver.4030 socal #: alloc of dma space failed
socal.driver.4035 socal #: alloc of dma space failed
socal.driver.4040 socal #: bind of dma handle failed
socal.driver.4045 socal #: bind of dma handle failed
socal.driver.4050 socal #: alloc of dma handle failed
socal.driver.4060 socal #: alloc of dma space failed
socal.driver.4065 socal #: alloc of dma space failed
socal.driver.4070 socal #: bind of dma handle failed
socal.driver.4075 socal #: bind of dma handle failed
socal.driver.4110 socal #: Buffer pool DVMA alloc failed
socal #: attach failed: device in slave-only slot
socal #: attach failed: hilevel interrupt unsupported
socal #: probe: Not self-identifying
socal: start failed.